Authorised Bosch Rexroth Partner • KombiTec GmbH

KombiTec – Resistance Welding

13 solutions in 4 groups – compacting, welding heads, controls, workstations and equipment

The German company KombiTec GmbH specialises in advanced resistance micro-welding technology – from initial trials in its own laboratory and feasibility studies to manual and semi-automatic workstations and modules for full automation.

Compacting and joining of strands – 2:

KombiTec KWZ-10 compacting tool

KWZ compacting tools – 0.06 to 12 mm² →

KWZ-Micro, KWZ-05-02, KWZ-10 and KWZ-15: resistance compacting of strand ends, also mid-span and tinned strands.

Technical data →
KombiTec KWZ-Splice – tool for resistance compacting and joining of wires (0.5–12 mm²)

⚡ KWZ-Splice tool (0.5–12 mm²) →

Resistance compacting of stranded copper wire ends and through-splicing without ferrules (cycle time ~2 s).

Technical data →

Welding heads – 4:

KombiTec SK-2110 welding head

SK single welding heads – 2 to 2500 N →

SK-2004 to SK-2350: spot and projection welding, thermode, hot crimping, current up to 20 kA.

Technical data →
KombiTec DK-2015 dual welding head

DK dual welding heads – 0.2 to 1500 N →

DK-2004, DK-2012, DK-2015, DK-2110: gap, step and thermocompression welding, current up to 25 kA, repeatability ±0.01 mm.

Technical data →
KombiTec SKe-700 servo-electric head

SKe-150 and SKe-700 servo-electric heads →

Inverter-controlled servo drive, real-time force profile and measurement, 150 / 700 N, ±0.01 mm.

Technical data →
KombiTec SZ-2035 welding tongs

SZ-2035 welding tongs – 300 N →

For hard-to-reach areas: welding enamelled wires to contacts, compacted strands and coil leads.

Technical data →

Controls and power sources – 4:

KombiTec KT-SST-BR-7300 welding inverter

KT-SST-BR inverters (Bosch Rexroth) + PRI7000 →

Medium frequency 1–2 kHz, up to 180 kVA, KSR and adaptive control, up to 2000 programs and 250 heads.

Technical data →
Harms & Wende iSpot welding control

Harms & Wende controls – iSpot, Primus, Genius →

Micro-welding and resistance soldering from 5 A to 20 kA, control of up to 4 heads, XPegasus software.

Technical data →
KombiTec KT-SST welding power source

KT-SST power source – 230 V, 4 kVA →

Compact 50 Hz source with PLC and transformer, powered from a 230 V / 16 A socket, for spot welding and hot staking.

Technical data →
KombiTec KT-SST-ACBAT cell welder

KT-SST-ACBAT cell welder – up to 4 kA →

Ready-to-use station for gap welding of cells and batteries from a 230 V socket, with pneumatics and table.

Technical data →

Workstations and equipment – 3:

KombiTec HA welding station

HA welding station – 1200 / 1600 mm →

Modular station for KombiTec heads, tongs and inverters: LED, ESD version, manual or automated operation.

Technical data →
KombiTec KT-KG-PFA-ECH chiller

KT-KG chillers – 1.6 to 5 kW →

Four sizes of water chillers for weld heads, tongs, inverters and transformers, from compact 230 V units up to 5 kW.

Technical data →
KombiTec KT-ABS fume extractor

KT-ABS fume extractor – 250 to 340 m³/h →

HEPA H13 filtration and activated carbon, 99.95%, 1 to 5 stations, on castors.

Technical data →

More KombiTec capabilities:

🔩 Welding Heads (Servo / Pneumatic)

Single, double and servo-electric welding heads and welding tongs with highly repeatable electrode force.

🎛️ Controls and Workstations

Ergonomic workstations equipped with advanced welding controls (including Bosch Rexroth solutions) with full process parameter monitoring.

🔋 Special and Battery Applications

Welding of HV/LV terminals, connections in battery modules and power electronics, plus dedicated tools for bending IC leads.

🔬 From laboratory trials to line implementation:

Frequently asked technical questions (FAQ):

How does resistance compacting of wire ends work?

Resistance compacting is a thermo-mechanical densification of a multi-strand copper conductor into a uniform, solid end without wire ferrules. This ensures low contact resistance and makes further assembly or welding to a terminal easier.

Can welding trials (feasibility study) be carried out before choosing a machine?

Yes, KombiTec has its own welding laboratory. Based on the wire and part samples you send, we carry out process trials and select the optimal configuration of the welding head and Bosch Rexroth control.

In which industries are KombiTec systems most often used?

KombiTec solutions are used in the automotive industry (LV/HV harnesses, sensors), battery pack production, power electronics, household appliances and electrical engineering.

KombiTec GmbH Resistance micro-welding Conductor compacting Bosch Rexroth Partner Wire splicing Terminal welding