⚙️ Looking for the right Samec machine for your wire?
Use our interactive tool to select machines and production lines.
🚀 Launch the Samec Machine SelectorSamec Macchine – Cable Processing Lines
The Italian company Samec Macchine s.r.l. (part of the essebi automation group, based in Santorso near Vicenza) designs and builds high-performance machines for cutting, stripping and jacket slitting of cables, as well as integrated production lines for the electrical engineering, power and automotive industries.
Cable processing: cutting, stripping, unjacketing (10):

TSA25E – cut & strip machine up to 240 mm² →
Cutting, stripping and unjacketing of single-core, multi-core and flat cables 1–240 mm² (Ø 4–32 mm) without changing blades.
Technical data →
TSA15E – cut-and-strip machine, 1–70 mm² →
Cables Ø 2–16 mm, feed up to 3 m/s, pieces 120 mm – 500 m, 400 V supply.
Technical data →
TSA12E – cut-and-strip machine, 0.5–35 mm² →
Cables Ø 2–13 mm, feed up to 2 m/s, pieces 120 mm – 500 m, 230 V supply.
Technical data →
TSS130E – comb-blade machine up to 50 mm² →
Cables Ø 1–16 mm, jacket removal up to 160 mm on one side, 10-inch screen, memory for 1000 cables.
Technical data →
TSA10E – cut-and-strip machine, 0.2–16 mm² →
Machine with drive rollers, encoder and 7-inch screen for wires Ø 0.2–9 mm.
Technical data →
TSA8E – compact machine, 0.05–10 mm² →
Bench-top machine with belt drive and 7-inch touchscreen for wires Ø 0.3–8 mm.
Technical data →
SP40 – automatic cutter up to 120 mm² →
Caterpillar automatic cutter for cables up to Ø 35 mm, conduits up to Ø 36 mm and tapes up to 110×35 mm.
Technical data →
SP10 – automatic cutter up to 25 mm² →
Compact automatic cutter for cables up to Ø 20 mm, tubes, sleeves and flat cables up to 40×20 mm.
Technical data →
SG140P – pneumatic jacket stripper →
Semi-automatic machine with foot pedal for cables Ø 2–20 mm and up to 75 mm², no electrical supply needed.
Technical data →
SG600 – pneumatic jacket stripper →
Semi-automatic machine with foot pedal and 10×75 mm opening, also for flat cables.
Technical data →Cable pay-off and feeding (4):

MAC1600 – drum pay-off up to 2500 kg →
Motorised pay-off with roller buffer (2 m/s) for drums Ø 800–1800 mm.
Technical data →
MAC1000 / MAC1300 – drum pay-off up to 700 kg →
Motorised lifting of Ø 500–1300 mm drums, electronic brake, 2 m/s.
Technical data →
MAC600 – reel pay-off up to 60 kg →
Pay-off for reels up to Ø 600 mm with roller buffer (H unit), 2 m/s.
Technical data →
AL32-50 – pre-feeder from drums up to 300 kg →
Belt-driven feeder for Ø 32 mm cables and flat cables up to 50 mm.
Technical data →Coiling (6):

RV800 – coiler, coils up to Ø 750 mm →
Ø 800 mm plate with retractable pins, cables up to Ø 32 mm, 2.5 m/s.
Technical data →
RV800EL – large coils with binding →
Automatic binding of Ø 208–713 mm coils from Ø 10–30 mm cables.
Technical data →
RV500 – coiler, coils up to Ø 500 mm →
Cables and tubes up to Ø 20 mm, 7-inch screen, 300 programs.
Technical data →
RV500EL – coils up to Ø 500 mm with binding →
Automatic coil binding, cables Ø 3–20 mm.
Technical data →
RV500EF – cable-tie binding →
Coils Ø 110–450 mm bound with ties, cables up to Ø 16 mm.
Technical data →
RV350D – coiler with two plates →
One coil winds while you remove the other. Coils up to Ø 350 mm.
Technical data →Take-off and stacking of cut lengths (2):

AC2-3-4 – motorised stacker, 2–4 m →
Conveyor up to 2 m/s and Beckhoff panel, cables Ø 2–26 mm, pieces up to 4.5 m.
Technical data →
AC-E – non-motorised stacker, 1–3 m →
Simple stacker for TSA machines, cables Ø 2–18 mm, pieces up to 3.5 m.
Technical data →🚀 Why implement Samec Macchine technology?
- One integrated line (inline processing): All Samec units (pay-off, marker, cutting machine, stacker) are connected by signal cables and work as a single synchronised production line.
- Rugged industrial design: Welded steel frames, mechanical parts protected against oxidation and pneumatic components from reputable European suppliers (EN60204-1 compliant).
- From thin wires to heavy 240 mm² cables: Unique versatility that lets one machine process both control wires and heavy power cables.
Frequently asked technical questions (FAQ):
What makes the flagship Samec TSA25E stand out?
The TSA25E handles a very wide range of cross-sections (from 1 mm² up to 240 mm², diameter 4–32 mm) and performs cutting, stripping and unjacketing without changing blades.
Can Samec machines be combined into a complete automatic line?
Yes. A typical inline line consists of 4 connected modules: 1. Pre-feeder / pay-off -> 2. Inkjet marker -> 3. TSA25E automatic machine -> 4. Coiler or line stacker.
Where are Samec machines made?
All machines are designed and manufactured in Italy at the Samec Macchine s.r.l. plant in Santorso (province of Vicenza), in compliance with the EN60204-1 safety standard.