✂️ Cutting, stripping and unjacketing
One cycle processes one cable end: it cuts, strips and removes the jacket. The other end is processed in the next cycle.
Samec SG140P is a purely pneumatically controlled machine for single-core, multi-core and flat cables, insulated or bare. In one cycle it cuts, strips and removes the jacket from one end of the cable; the other end is processed in the next cycle. The operator inserts the cable by hand and starts the cycle with a foot pedal. It needs no electrical supply, only compressed air.
Blade unit with guide and a multi-core cable
Cable guide in front of the blades
Setting the jacket strip length stop
Foot pedal starting the cycle
One cycle processes one cable end: it cuts, strips and removes the jacket. The other end is processed in the next cycle.
Insulation diameter 2–20 mm, flexible multi-core cable cross-section up to 75 mm², flat cables up to 12 mm wide.
Insulation stripping up to 40 mm, conductor stripping from 3.5 mm, jacket removal without cutting the cable with unlimited length, with cutting up to 140 mm.
Fully pneumatic drive (6–8 bar), foot-pedal start. Compact machine, 600 × 500 × 350 mm, 25 kg.
| Insulation diameter | 2–20 mm |
|---|---|
| Flat cable width | max. 12 mm |
| Insulation strip length | max. 40 mm |
| Single-core cable stripping | min. 3.5 mm |
| Flexible multi-core cable cross-section | max. 75 mm² |
| Jacket removal without cutting the cable | unlimited length |
| Jacket removal with cable cutting | max. 140 mm |
| Pneumatic supply | 6–8 bar, continuous operation |
| Dimensions | 600 × 500 × H 350 mm |
| Weight | 25 kg |
When you process cables in short runs or at an assembly station and need repeatable jacket removal without investing in an automatic machine. The machine needs no electricity, takes up little space, and interchangeable guides with blades let you adapt it to specific cables. For large runs with cutting to length, a TSA series machine is the better choice.
Single-core, multi-core and flat cables, insulated or bare, with an insulation diameter of 2–20 mm. Flexible multi-core cable cross-section up to 75 mm², flat cable width up to 12 mm.
No. In one cycle the machine processes one cable end; the other end is processed in the next cycle, started with the foot pedal.
According to the datasheet, the machine is purely pneumatically controlled and requires compressed air at 6–8 bar.