📏 0.05–10 mm² Range (Ø 0.3–8 mm)
Precise processing of a wide range of wires – from ultra-thin 0.05 mm² (Ø 0.3 mm) signal conductors up to flexible 10 mm² (Ø 8 mm) multi-core wires.
Samec TSA8E is an extremely versatile, compact electronic machine designed for processing single- and multi-core wires (insulated or bare). The machine counts pieces, measures cut length, strips and removes the jacket (sheathing) without changing blades, and is operated from a clear 7" touchscreen.
TSA8E belt-and-roller drive, guide bushes and blade head
7-inch colour touch panel (memory for 1000 codes) and mushroom E-Stop button
Rear communication panel for synchronisation with pay-off, marker and stacker
Precise processing of a wide range of wires – from ultra-thin 0.05 mm² (Ø 0.3 mm) signal conductors up to flexible 10 mm² (Ø 8 mm) multi-core wires.
The intuitive control panel with backlit 7" touchscreen lets you view work status in real time, adjust parameters, manage 1000 programs and read diagnostics.
Transport belts configurable in different positions, moving parts on bearings, and ground, hardened sliding shafts in bronze bushings.
No blade change needed between cutting and unjacketing. Optional hard-metal-coated blades for silicone cables and full inline operation.
| Data setup | 7" touchscreen (backlit display with full diagnostics) |
|---|---|
| Program memory (storable codes) | Max. 1,000 stored programs |
| Programmable pieces / batches | Max. 9,999 pcs • Programmable lots |
| Workable length | Min. 18 mm – Max. 1,000 m |
| Workable diameter | Min. 0.3 mm – Max. 8 mm |
| Flexible stranded cable cross-section | Min. 0.05 mm² – Max. 10 mm² |
| Strip and unjacket length | Fully programmable (no blade changes) |
| Transport speed and dynamics | Max. 1.5 m/s (programmable acceleration and deceleration ramps) |
| Connectors and inline accessory management | Pre-feeder or pay-off, programmable marker, linear stacker, pin rewinder |
| Supplied accessories | Set of steel guide tubes Ø 2 – 4 – 6 mm + steel cut-and-strip blades |
| On request | Guide tubes Ø 1–8 mm, carbide blades for silicone, radius blades, cable straightener, stand |
| Electrical supply and current draw | 230 V / 50–60 Hz / 3 A (compliant with EN 60204-1) |
| Pneumatic supply | Blow cleaning option |
| Overall dimensions and weight | 550 × 540 × H 480 mm • Weight: 35 kg |
When you process thin wires of 0.05–10 mm² (Ø 0.3–8 mm) and need a compact bench-top machine. The belt drive, 7-inch touchscreen and operation without blade changes shorten changeovers on short runs with frequent wire changes.
The Samec TSA8E handles flexible single- and multi-core wires from 0.05 mm² to 10 mm² and from 0.3 mm to 8 mm outer diameter. The cut length ranges from 18 mm up to 1000 metres.
The TSA8E is a compact bench-top machine (550 x 540 x 480 mm, 35 kg, single-phase 230 V) for small and medium cross-sections (0.05–10 mm², Ø 0.3–8 mm). The TSA25E, by contrast, is a heavy-duty stationary machine (400 kg, 400 V) for thick cables from 1 to 240 mm² (Ø 4–32 mm).
As standard, the TSA8E includes a set of Ø 2-4-6 mm steel guide tubes and steel cutting and stripping blades. Available on request: Ø 1–8 mm guide tubes, carbide-coated (hard metal) blades for silicone cables, profile blades with different edge radii, a cable straightening kit and a stand.