🔌 Cables 0.5–35 mm², Ø 2–13 mm
Flexible multi-core cable cross-section 0.5–35 mm², outer diameter 2–13 mm, flat cables.
Samec TSA12E processes single-core, multi-core and flat cables, insulated or bare. It counts pieces in a batch, measures piece length, and strips and unjackets without changing blades. The operator sets and adjusts parameters from a keypad with a backlit display (touchscreen optional) and sees work progress in real time. The machine connects by signal cable to Samec pay-offs, pre-feeders, markers and stackers, forming one line with shared emergency handling.
TSA12E processing area with drive rollers and cutting head
Batch programming from the keypad and display
Control buttons and emergency stop
Samec line: pre-feeder, inkjet marker, cut-and-strip machine, coiler
Flexible multi-core cable cross-section 0.5–35 mm², outer diameter 2–13 mm, flat cables.
Cutting, stripping, insulation displacement and unjacketing programmed without changing blades. Double incision with cable rotation.
Length controlled by an external encoder, feed up to 2 m/s with programmable ramps.
4 A draw from single-phase mains, memory for 5000 programs, batches up to 9,999 pcs.
| Data input | Keypad and backlit display • option: touchscreen |
|---|---|
| Program memory | max. 5000 |
| Batch size | max. 9,999 pcs (programmable batches) |
| Piece length | min. 120 mm – max. 500 m |
| Length control | External encoder |
| Cable diameter | min. 2 – max. 13 mm |
| Flexible multi-core cable cross-section | min. 0.5 – max. 35 mm² |
| Insulation displacement | Programmable |
| Strip and unjacket length | Programmable |
| Double incision with cable rotation | Stripping min. 14 mm on one side, programmable on the other |
| Feed speed | max. 2 m/s, programmable ramps |
| Software for an external incision module | ✓ |
| Accessory connectors | Pre-feeder or pay-off, programmable hot-stamp / inkjet marker, linear stacker or pin coiler |
| Electrical supply | 230 V – 50/60 Hz – 4 A |
| Pneumatic supply | 6 bar, continuous operation |
| Dimensions and weight | 1100 × 645 × H 1350 mm • 180 kg |
| Compliance | Electrical installation to EN 60204-1 |
When you process cables with a larger cross-section than the TSA10E handles (up to 16 mm²), but don't need the range and 400 V supply of the larger models. The TSA12E handles 0.5–35 mm² on a 230 V supply. For cables up to 70 mm² there is the TSA15E, and up to 240 mm² the TSA25E.
Single-core, multi-core and flat cables, insulated or bare, 2–13 mm in diameter. The datasheet gives a cross-section of 0.5–35 mm² for flexible multi-core cable.
From 120 mm to 500 m, with length control by an external encoder and feed up to 2 m/s.
No. According to the datasheet, the machine runs on 230 V – 50/60 Hz, 4 A draw.