📏 Range 1–240 mm² (Ø 4–32 mm)
An exceptionally wide range of flexible cable cross-sections – from 1 mm² control wires up to heavy 240 mm² power cables.
Samec TSA25E is an advanced automatic machine for processing insulated and bare single-core, multi-core and flat cables. It counts the pieces in a batch, measures the cutting length precisely, strips the conductors and removes the outer jacket (unjacketing) without changing the blades.
Double belt drive, guide tube and central cutting and stripping head
Patented head (EP-B1-1070374) and Ø 18 mm bushing processing a multi-core cable
Result of the double incision with cable rotation, exposing the shield on a thick cable
12-inch colour touch panel (optionally with PC) with zone visualisation
Example of a complete inline line: 1. Pre-feeder → 2. Inkjet marker → 3. TSA25E → 4. Coiler
An exceptionally wide range of flexible cable cross-sections – from 1 mm² control wires up to heavy 240 mm² power cables.
Cutting, stripping, insulation displacement and outer jacket removal (unjacketing) in one cycle without retooling the blades.
Double incision with cable rotation: stripping from 18 mm on one side, fully programmable on the other.
Built-in interfaces and communication cables for exchanging signals and managing the whole line: de-reeler, pre-feeder, inkjet marker and stacker/coiler.
| Data setup | Keyboard with backlit display (optional touch screen) |
|---|---|
| Storable codes | Max. 5,000 stored programs |
| Programmable quantity | Max. 9,999 pcs (programmable lots) |
| Workable length | Min. 140 mm – max. 500 m (controlled by an external encoder) |
| Workable cable diameter | Min. 4 mm – max. 32 mm |
| Flexible cable cross-section | Min. 1 mm² – max. 240 mm² |
| Stripping and unjacketing | Programmable (strip, unjacket & insulation displacement without blade change) |
| Double incision with cable rotation | Stripping min. 18 mm on one side, fully programmable on the other |
| Feed speed | Max. 2 m/s (programmable acceleration and braking ramps) |
| Scoring unit support | Built-in software for an external scoring unit (✓) |
| Connections for line accessories | Pre-feeder / de-reeler, inkjet marker, line stacker or coiler |
| Power supply | 400 V / 50–60 Hz / 16 A (compliant with EN 60204-1) |
| Air supply | 6 – 8 bar (continuous operation) |
| Overall dimensions and weight | 1600 × 740 × H 1400 mm • Weight: 400 kg |
No. The design of the TSA25E cutting head allows cutting, stripping and outer jacket removal (unjacketing) without changing the blades.
The minimum workable length is 140 mm and the maximum is 500 metres, with length control by an external encoder.
The machine can be equipped with a touch screen, an optional encoder kit for managing accessories (motorised stacker or mandrel coiler) and an external scoring unit.