🔌 Cables 1–70 mm², Ø 2–16 mm
Flexible cable cross-section 1–70 mm², outer diameter 2–16 mm, flat cables.
Samec TSA15E processes single-core, multi-core and flat cables, insulated or bare. It counts pieces in a batch, measures piece length, and strips and unjackets without changing blades. Parameters are set from a keypad with a backlit display, or optionally on a touchscreen with a PC. With feed up to 3 m/s, it is the fastest machine in this family. It connects with Samec pay-offs, pre-feeders, markers and stackers into a single line.
TSA15E processing area with drive roller units
Drive rollers and cable guide
Batch programming on the screen with keypad
Samec line: pre-feeder, inkjet marker, cut-and-strip machine, coiler
Flexible cable cross-section 1–70 mm², outer diameter 2–16 mm, flat cables.
The highest feed speed in the TSA family, with programmable acceleration and deceleration ramps.
Cutting, stripping, insulation displacement and unjacketing programmed without changing blades. Programmable double incision with cable rotation.
Keypad and display as standard, optional touchscreen with PC. Memory for 5000 programs.
| Data input | Keypad and backlit display • option: touchscreen with PC |
|---|---|
| Program memory | max. 5000 |
| Batch size | max. 9,999 pcs (programmable batches) |
| Piece length | min. 120 mm – max. 500 m |
| Length control | External encoder |
| Cable diameter | min. 2 – max. 16 mm |
| Flexible cable cross-section | min. 1 – max. 70 mm² |
| Insulation displacement | Programmable |
| Double incision with cable rotation | Programmable |
| Feed speed | max. 3 m/s, programmable ramps |
| Software for an external incision module | ✓ |
| Accessory connectors | Pre-feeder or pay-off, programmable marker / inkjet, linear stacker or pin coiler |
| Electrical supply | 400 V – 50/60 Hz – 8 A |
| Pneumatic supply | 6 bar, continuous operation |
| Dimensions and weight | 1230 × 650 × H 1340 mm • 220 kg |
| Compliance | Electrical installation to EN 60204-1 |
When you process cables up to 70 mm² and throughput matters: feed up to 3 m/s shortens cycle time on long pieces. For smaller cross-sections (up to 35 mm², 230 V supply), the TSA12E is enough, while cables up to 240 mm² and Ø 32 mm are handled by the TSA25E.
Single-core, multi-core and flat cables, insulated or bare, 2–16 mm in diameter, with a flexible cable cross-section of 1–70 mm².
Feed up to 3 m/s with programmable acceleration and deceleration ramps. Pieces from 120 mm to 500 m.
400 V – 50/60 Hz, 8 A draw, plus compressed air at 6 bar.