🏋️ Drums up to 450 or 700 kg
MAC1000: Ø 500–1000 mm, up to 450 kg. MAC1300: Ø 500–1300 mm, up to 700 kg.
Samec MAC1000 and the larger MAC1300 unwind flexible round and flat cables from drums and feed them to cutting or cut-and-strip machines. The cable passes through rollers that build a reserve and regulate the pay-off. The pay-off works independently and unwinds cable only when the machine pulls it. The drum is lifted by motor, and a drive with brake stops it in case of a fault or when the door is opened. A safety device on the first roller stops the machine if the cable does not come off the drum correctly.
Compensation rollers building a cable reserve
Gearmotor with automatic brake
MAC1000 pay-off control panel
MAC1000 in line with a cut-and-strip machine
MAC1000: Ø 500–1000 mm, up to 450 kg. MAC1300: Ø 500–1300 mm, up to 700 kg.
The drum is lifted by motor, and the whole machine stands on swivel castors, which makes loading easier.
Instant braking if the cable moves back, stop when the door is opened, and a sensor on the first roller.
The pay-off feeds cable at up to 2 m/s and runs only when the machine is pulling cable.
| Drum lifting | Motorised (MAC1000 and MAC1300) |
|---|---|
| Electronic brake on cable reverse movement | ✓ (both models) |
| Drum diameter | MAC1000: 500–1000 mm • MAC1300: 500–1300 mm |
| Drum width | MAC1000: max. 650 mm • MAC1300: 730 mm |
| Drum weight | MAC1000: max. 450 kg • MAC1300: 700 kg |
| Flexible multi-core cable diameter | max. Ø 18 mm (depending on cable flexibility) |
| Flexible flat cable width | max. 18 mm (depending on flexibility) |
| Drum bore | MAC1000: 65–90 mm • MAC1300: 70–90 mm |
| Unwinding speed | 2 m/s |
| Electrical supply | MAC1000: 230 V – 50/60 Hz – 7 A • MAC1300: 230 V – 50/60 Hz – 9 A |
| Pneumatic supply | max. 6 bar |
| Dimensions | MAC1000: 1700 × 1600 × H 1720 mm • MAC1300: 1880 × 1630 × H 1930 mm |
| Weight | MAC1000: 500 kg • MAC1300: 560 kg |
| Compliance | Electrical installation to EN 60204-1 |
When you work with drums heavier than the reels handled by the MAC600, but don't need a pay-off for 2500 kg drums like the MAC1600. Motorised drum lifting and swivel castors shorten drum changes, and the pay-off responds by itself to the machine drawing cable.
The MAC1000 handles drums Ø 500–1000 mm, up to 450 kg and 650 mm wide. The MAC1300 handles drums Ø 500–1300 mm, up to 700 kg and 730 mm wide. The larger model also has larger dimensions and higher current draw.
Flexible multi-core cables up to Ø 18 mm and flat cables up to 18 mm wide. It is worth checking the flexibility of the specific cable before buying.
The gearmotor with brake stops the drum in case of a fault or when the door is opened, the electronic brake responds to cable reverse movement, and a sensor on the first roller stops the machine if the cable does not come off correctly.