🏋️ 2500 kg Capacity and Independent Arms
Electric lifting of drums 800–1800 mm in diameter. Two independently moving arms (right and left) ensure perfect centring of reels 600–1350 mm wide.
Samec MAC1600 is designed for effortless unwinding of heavy flexible cables and flat cables wound on large drums (up to 2,500 kg) and for smoothly feeding cut-and-strip machines (e.g. Samec TSA25E) or cut-to-length machines.
Independent drum-lifting arms and drive with self-braking gearmotor
Multi-pulley compensation buffer with instant-stop sensor (2 m/s)
Electric lifting of drums 800–1800 mm in diameter. Two independently moving arms (right and left) ensure perfect centring of reels 600–1350 mm wide.
The cable passes several times through a set of moving pulleys, forming a buffer that automatically matches the unwinding speed to the cutting machine's demand.
The drum is loaded from the rear of the machine through a wide automatic gate. The whole working area is enclosed by steel mesh for full visibility and safety.
Self-braking gearmotor, a safety device on the first roller that detects overlapping turns (cable jamming), and an electronic stop if the wire moves back.
| Reel lifting | Motorised electric (independent movement of left and right arms) |
|---|---|
| Maximum liftable drum weight | Max. 2,500 kg (2.5 tonnes) |
| Liftable reel diameter | Min. 800 mm – Max. 1,800 mm |
| Reel width | Min. 600 mm – Max. 1,350 mm |
| Reel bore | Min. 50 mm – Max. 100 mm |
| Max. multi-core cable diameter | Max. 30 mm (depending on cable flexibility) |
| Max. flat cable width | Max. 30 mm (depending on flat cable flexibility) |
| Unwinding speed | 2 m/s (continuous control via the multi-pulley compensation buffer) |
| Electronic stop on cable reverse movement | Yes (electronic instant-stop device in the event of cable reverse movement) |
| Jamming / crossed-turns sensor | Installed on the first pulley (instant emergency stop) |
| Electrical supply and current draw | 400 V / 50–60 Hz / 15 A (compliant with EN 60204-1) |
| Pneumatic supply | Max. 6 bar |
| Overall dimensions | 2,850 × 2,660 × H 1,950 mm |
| Machine weight | 1,800 kg |
When you work with drums up to 2500 kg and Ø 800–1800 mm and want to feed cable to the machine without jerks. The motorised drive with roller buffer feeds cable at up to 2 m/s, and the cage protects the operator. The pay-off works with Samec lines (e.g. TSA25E), but can also be connected to machines already running in your hall.
The Samec MAC1600 motorised pay-off handles cable drums weighing up to 2,500 kg, with an outer diameter from 800 mm to 1,800 mm, drum width from 600 mm to 1,350 mm and a centre bore from 50 mm to 100 mm.
The cable is threaded several times through a set of rollers forming an active buffer (cable accumulator). The pay-off works independently and unwinds the drum only when the cutting machine draws wire. Once connected to the cutting machine by a signal cable (e.g. Samec TSA25E), the machine starts only when the pay-off is also running.
The MAC1600 has a steel-mesh safety cage, rear drum loading through a large automatic gate, a self-braking gearmotor that stops the drum when the door is opened or a fault occurs, a sensor on the first roller detecting jammed/crossed turns, and an electronic instant-stop system in the event of cable reverse movement.