🔪 Cables up to 120 mm² and 80×35 mm Profile
Cutting thick single- and multi-core copper cables up to 120 mm² (diameter up to Ø 35 mm) as well as flat wires, tapes and sleeves up to 80×35 mm (widened option: 110×35 mm).
Samec SP40 is a versatile caterpillar automatic cutter designed for precise cutting to length of single- and multi-core cables (up to 120 mm², Ø 35 mm), corrugated tubes / conduits (Ø 30 mm, optional Ø 36 mm), insulating sleeves, braids and flat cables (80×35 mm, optional widened 110×35 mm). The material is guided by two motorised caterpillar belts, with encoder length control and operation from a 4-inch Siemens SIMATIC HMI touchscreen.
External measuring encoder and braid / cable inlet guides
Motorised caterpillar belts with pneumatic pressure (feed up to 1.5 m/s)
Control panel with 4″ Siemens SIMATIC HMI touchscreen (100 programs)
Inline setup: 1. SP40 automatic cutter + 2. AC2-3-4 linear stacker
Cutting thick single- and multi-core copper cables up to 120 mm² (diameter up to Ø 35 mm) as well as flat wires, tapes and sleeves up to 80×35 mm (widened option: 110×35 mm).
Handles conduits and corrugated tubes up to Ø 30 mm (up to Ø 36 mm in the optional version). A dedicated set of conical blades and guide bushes is available for clean conduit cutting.
The dual caterpillar drive ensures reliable, slip-free feed at up to 1.5 m/s (with programmable acceleration and deceleration ramps) and encoder length control.
Convenient programming of batches (up to 9,999 pcs) and cut lengths (up to 100 m), storage of up to 100 recipes in the controller memory, with full diagnostics and inline operation.
| Data input and display | Membrane keypad or 4″ touchscreen (Siemens SIMATIC HMI) |
|---|---|
| Programmable batch size (quantity) | max. 9,999 pcs |
| Program memory (storable codes) | max. 100 programs |
| Maximum cut length (workable length) | max. 100 m |
| Length control | Via encoder on the belts + external measuring encoder |
| Maximum material working dimensions | max. 80 × 35 mm • Widened model (optional): max. 110 × 35 mm |
| Maximum cable / tube diameter | max. Ø 35 mm |
| Maximum cut cable cross-section | max. 120 mm² |
| Corrugated tube (conduit) diameter | Standard: max. Ø 30 mm • Option: max. Ø 36 mm |
| Feed speed and ramps | max. 1.5 m/s • Programmable acceleration and deceleration ramps |
| Standard blades | 1× lower flat blade (90 mm wide) + 1× upper guillotine blade (90 mm wide) for flat cables, sleeves and tubes |
| Optional accessories and blades (upon request) | Upper "V" blade for very hard cables, set of conical blades and guides for conduits, support bench |
| Inline interfaces | Pre-feeder or pay-off, printer / marker, linear stacker (e.g. AC2-3-4), pin coiler (e.g. RV800) |
| Power supply, dimensions and weight | 230 V – 50/60 Hz – 6 A • Air: 6 – 8 bar (continuous) • Dimensions: 850 × 575 × H 420 mm • Weight: 60 kg |
When you mainly need cutting to length: cables up to 120 mm², conduits up to Ø 36 mm or tapes and sleeves up to 110×35 mm, without investing in a machine with stripping. Interchangeable blades (guillotine, V-type, conical for conduits) let one machine handle different materials, and the SP40 can be linked into a line with an AC2-3-4 stacker or RV800 coiler.
The Samec SP40 automatic cutter cuts cables up to max. 120 mm² and max. 35 mm outer diameter. For flat materials (ribbon cables, sleeves, braids), the maximum working dimension is 80 × 35 mm (or 110 × 35 mm in the optional widened version). For corrugated tubes (conduits), the maximum diameter is 30 mm as standard and 36 mm in the optional version.
As standard, the machine has 1 lower flat blade 90 mm wide and 1 upper guillotine blade (90 mm) for flat cables, sleeves and tubes. Available on request: an upper V blade for cutting very hard, tough cables, and a set of conical blades and guides dedicated to deformation-free cutting of corrugated tubes (conduits).
The material is fed by two motorised caterpillar conveyors (speed up to 1.5 m/s, cut length up to 100 m), and length is measured by an encoder (including an external measuring encoder). The machine stores up to 100 programs (batches up to 9,999 pcs) and has connectors for inline operation with pay-offs, pre-feeders, printers, linear stackers (e.g. AC2-3-4) and coilers (e.g. RV800).