🔪 Cables up to 25 mm², tubes and sleeves
Cutting cables up to 25 mm² and 20 mm in diameter, and flat materials up to 40×20 mm.
Samec SP10 is a bench-top automatic machine for cutting cables, tubes, sleeves and flat cables to length. It counts pieces and measures the piece length by itself, and the material is fed by two servo-driven rollers. All parameters are set on a touchscreen, which also shows machine status and diagnostic messages. The SP10 is made in two versions that differ only in the length measuring system.
SP10 cutting area with Plexiglas guard and pneumatic guillotine
Two servo-driven transport rollers
Touchscreen, emergency stop and start button
Cut-piece outlet and material guide adjustment
Cutting cables up to 25 mm² and 20 mm in diameter, and flat materials up to 40×20 mm.
Two servo-driven transport rollers, feed up to 1 m/s with programmable acceleration and deceleration ramps.
Batches up to 9,999 pcs, pieces up to 100 m, memory for 100 programs. Optional encoder length control.
Optional connectors for a pre-feeder or pay-off, hot-stamp marker and linear stacker.
| Data input | Touchscreen |
|---|---|
| Batch size | max. 9,999 pcs |
| Program memory | max. 100 |
| Piece length | max. 100 m |
| Length control (option) | Encoder |
| Material working dimensions | max. 40 × 20 mm (the datasheet also states: max. width 48 mm, max. height 20 mm) |
| Material diameter | max. Ø 20 mm |
| Cut cable cross-section | max. 25 mm² |
| Feed speed | max. 1 m/s (adjustable 0–1 m/s), programmable ramps |
| Inline connectors (option) | Pre-feeder or pay-off, hot-stamp marker, linear stacker |
| Electrical supply | 230 V – 50/60 Hz – 2 A (power 1000 W) |
| Pneumatic supply | 6–8 bar, continuous operation (the datasheet also states: 6–7 bar) |
| Dimensions and weight | 620 × 450 × H 340 mm • 30 kg |
| Compliance | CE, electrical installation to EN 60204-1 |
When you mainly need to cut thinner cables, tubes, sleeves and flat cables to length, and a large caterpillar cutter would be overkill. The SP10 fits on a workbench (30 kg), runs from a 230 V socket and can work stand-alone or inline with a pay-off and stacker. For thicker cables (up to 120 mm²) and conduits up to Ø 36 mm, there is the SP40.
The SP10 cuts cables up to 25 mm² and 20 mm in diameter, as well as tubes, sleeves and flat cables up to 40 × 20 mm.
According to the datasheet, the two versions differ only in the length measuring system. Encoder length control is available as an option.
Yes. Optionally, the machine has connectors for a pre-feeder or pay-off, a programmable hot-stamp marker and a linear stacker.